Product Description
Double-layer trapezoidal corrugated board can reduce the use of raw materials such as steel through reasonable design while ensuring structural strength and performance. Compared with traditional building boards, double-layer trapezoidal corrugated board is lighter but stronger, which reduces construction costs to a certain extent and improves economic benefits.
Main Technical Parameters
| Material | Type | PPGI/GI |
| Thickness | 0.3-0.6mm |
| Width | 1220mm |
| Roller Stations | 12/13Stations |
| Roller & Shaft Material | 45# Steel Quenching and Plating |
| Diameter of Shaft | Φ70mm |
| Cutter Material | CR12 |
| Drive Type | Chain Drive |
| Speed | 15m/min |
| Total Power | 5.5+5.5KW |
| Voltage | 380V 50Hz 3Phases |
Working Flow
Decoiling → Material Feeding → Roll Forming → Cutting → Collecting
Component & Technical Parameters
This part is used to support Coil.
And make the coil in a rotary way.
Bearing capacity: 5T
Inner diameter: 470-530mm
In the production process of floor decking, metal sheets are usually supplied in the form of coils. The primary function of the uncoiler is to smoothly and steadily unwind these tightly wound metal sheets.
Hydraulic Pump Station
When the equipment encounters abnormal resistance or excessive pressure, it can automatically adjust the pressure of the hydraulic system to avoid damage to the equipment due to overload, thereby improving the reliability and stability of the floor deck forming machine.
Touch Screen Control Cabinet
The control cabinet has two modes, automatic and manual modes.
The unit length of the targeted sheet and quantity can be set in the touchscreen.
The system is simple and easy to operate.
The control cabinet can be interconnected with other equipment, such as working with the uncoiler, hydraulic pump station, etc., to ensure the efficient and stable operation of the entire floor decking forming machine system, providing a strong guarantee for the production of high-quality floor decking.
Feeding Table & Pre-Cutter
When the forming roller of the tile press applies pressure to the plate for rolling, the feed table can reduce the impact and vibration of the plate, so that the plate can enter the rolling process more smoothly, which helps to protect the equipment parts of the tile press, reduce equipment wear and failure, and also improve the quality and stability of plate rolling.
Shaft & Roller
The upper and lower rollers of a double-layer tile pressing machine usually have specific grooves and protrusions. When materials such as metal sheets are fed in and clamped between the two rollers, the rollers apply pressure to cause the material to undergo plastic deformation, thereby pressing the material into tiles of specific shapes, such as trapezoidal, wavy, etc.
Pressing Section & Cutter
After the continuous sheet is pressed and formed, it is divided into individual tile units to facilitate subsequent transportation, stacking and installation. If it is not cut and separated, the continuous sheet will be very inconvenient to use and it will be difficult to accurately lay and install it.
Product Tags:
|
|
Roofing Sheet Metal PPGI / GI Double Layer Roll Forming Machine Images
|
